Home / Guides / Deliverability

Why are my emails going to spam? Causes and fixes

The common reasons legitimate email lands in junk, from missing SPF, DKIM and DMARC to blacklists, link shorteners and stale lists, plus a checklist to find your cause.

7 min read · Updated 27 October 2026 · By the dijitul team

Emails go to spam because the receiving mail server does not trust them enough to put them in the inbox. That lack of trust nearly always comes from one of a handful of causes: missing or broken authentication (SPF, DKIM, DMARC), a poor sending reputation, a blacklist listing, content that looks like spam, or sending to people who never engage. The good news is that every one of these can be measured and fixed.

This guide walks through each cause in roughly the order a deliverability engineer would check them, then finishes with a checklist you can work through in twenty minutes.

1. Authentication is missing or broken

Mailbox providers want proof that you are allowed to send for the domain in your From address. That proof comes from three DNS records:

  • SPF lists the servers allowed to send for your domain. See our SPF record guide.
  • DKIM adds a cryptographic signature that proves the message was not altered and was sent with your domain's key. See DKIM explained.
  • DMARC ties the two together, checks that they line up with your visible From domain, and tells receivers what to do if they do not. See the DMARC guide.

The most common failures we see are an SPF record that does not include a newer sending service (a newsletter platform or CRM added later), an SPF record that exceeds the ten DNS lookup limit (see fixing too many DNS lookups), DKIM never switched on in the email platform, and no DMARC record at all. Since February 2024 Gmail and Yahoo require SPF or DKIM from every sender, and all three from bulk senders, so these gaps now cost far more than they used to.

Alignment matters as much as passing. If your newsletter tool signs DKIM with its own domain rather than yours, DKIM "passes" but does not align with your From address, and DMARC can still fail.

2. Your sending reputation is poor

Every mailbox provider keeps a score for your sending IP address and, increasingly, for your domain. That score is built from how recipients react: do they open, reply and move you out of spam, or do they ignore you, delete unread and click "report spam"? A poor reputation will push even perfectly authenticated mail into junk.

Reputation drops when you send to people who did not ask for your email, when complaint rates climb, and when lots of messages bounce. It recovers slowly, through consistent sending to engaged recipients. Gmail's bulk-sender rules ask you to keep the spam complaint rate shown in Google Postmaster Tools below 0.3%, and ideally under 0.1%.

3. You are on a blacklist

Blacklists (also called blocklists or DNSBLs) are databases of IP addresses and domains associated with spam. Many receiving servers check them on every incoming message. A listing on a major list can mean outright rejection; a listing on a minor list may just add points to your spam score.

Listings happen when an IP sends to spam traps, when a compromised account or website starts pumping out spam, or when a shared IP is abused by another customer. Our test checks 20 blacklists at once. If you find a listing, follow how to get off an email blacklist, and fix the cause before requesting removal.

4. The content looks like spam

Content filtering is less important than it was, but it still counts, particularly in filters like SpamAssassin that score individual rules. Things that add points include:

  • A subject line in capitals or stuffed with exclamation marks and pound signs.
  • A large HTML email with no plain-text version, or a plain-text part that does not match the HTML.
  • Broken HTML, hidden text, or tiny white-on-white text.
  • Misleading subject lines, such as fake "Re:" or "Fwd:" prefixes.
  • Attachments that commonly carry malware, such as executable files or macro-enabled documents.

Our SpamAssassin score guide explains how individual rules add up and which ones are worth fixing.

5. Links and URL shorteners

Filters check every link in your message against domain blacklists. If you link to a site that has been abused for spam, your message inherits that bad reputation. Public URL shorteners are a particular problem: spammers use them to hide destinations, so the shortener domains often appear on lists. Link to your own domain instead, and make sure the visible link text does not show one address while the link goes somewhere else.

Click-tracking domains used by email platforms can cause the same issue. Where your platform allows it, set up a branded tracking domain on a subdomain of your own.

6. Image-only emails

An email that is a single large image with little or no text is a classic spam pattern, because spammers use images to hide words from filters. It also fails for recipients who block images by default. Keep a sensible balance of real text to images, add alt text, and make sure the key message is readable without images loading.

Check your setup now: run a free test at mail-tester.co.uk and see your score in seconds.

7. Poor list hygiene

Old lists are full of problems: addresses that no longer exist (hard bounces), mailboxes that have been abandoned, and addresses that have been recycled into spam traps. Sending to them tells providers you do not look after your list.

  • Remove hard bounces immediately, after the first failure.
  • Use confirmed (double) opt-in for sign-up forms, so typos and fake addresses never get on the list.
  • Never buy, rent or scrape lists. Apart from the legal problems under UK GDPR and PECR, they are where spam traps live.
  • Honour unsubscribes promptly. Bulk senders to Gmail and Yahoo must support one-click unsubscribe and act on it within two days. See one-click unsubscribe.

8. Low engagement

Gmail in particular watches how recipients behave. If most of your list never opens your emails, the provider concludes that people do not want them and starts filtering them. Segment your list, send less often to inactive people, and run a re-engagement campaign before removing those who still do not respond after several months.

9. A sudden jump in volume

Going from a few hundred emails a week to tens of thousands overnight looks exactly like a compromised account or a new spammer. Providers throttle or junk the excess. New domains and new IPs need to build history gradually. Our email warm-up guide explains how to ramp up safely.

10. Shared IP addresses

If you send through shared web hosting or a budget email provider, your mail leaves from an IP that other customers also use. If one of them spams, the IP's reputation suffers and so does yours. Signs of this include a blacklist listing you cannot explain, or deliverability that changes even though you have changed nothing.

Fixes include moving business email to a dedicated provider, sending bulk mail through a reputable email service rather than your web server, or using hosting where you control the server and its IP. Also check that your sending IP has a matching reverse DNS (PTR) record. See reverse DNS and PTR records.

Managed UK hostingdijihostManaged UK hosting with Plesk, Cloudflare DNS, daily backups and a domain included, for £1 a day + VAT. Old sites welcome.Host with dijihost

Diagnostic checklist

Work through these in order. The first few catch most problems.

  1. Send a test. Send a real message from your normal system (not a test from a different tool) to the address on our home page and look at the full report.
  2. Check authentication. SPF, DKIM and DMARC should all pass, and SPF or DKIM should align with your From domain.
  3. Check every sending service. Repeat the test from your website forms, CRM, invoicing tool and newsletter platform. Each one needs to be covered by SPF and signing DKIM for your domain.
  4. Check blacklists. Any listing on a major list needs fixing first.
  5. Check reverse DNS. The sending IP should have a PTR record whose hostname resolves back to the same IP.
  6. Check links. Remove shorteners and any link flagged on a domain blacklist.
  7. Check content. Include a plain-text part, fix broken HTML and tone down the subject line.
  8. Check your list. When did you last remove bounces and long-term inactive subscribers?
  9. Check reputation data. Set up Google Postmaster Tools and look at the spam rate and authentication graphs.
  10. Check what changed. If the problem started on a particular day, look for a DNS change, a new tool, a volume spike or an unusual campaign around that date.
Do not change several things at once and then send to your whole list. Fix one issue, test again, and only go back to full volume once the test score and your inbox placement both look healthy.

Frequently asked questions

Why are my emails suddenly going to spam?

A sudden change usually has a sudden cause: a DNS change that broke SPF or DKIM, a new blacklist listing, a jump in sending volume, or a campaign that drew lots of complaints. Run a test and compare the result with what changed recently.

Why do my emails go to spam in Gmail but not Outlook?

Each mailbox provider uses its own filters and its own view of your reputation. Gmail weighs engagement and authentication heavily, so a sender with missing DMARC or a high complaint rate can land in Gmail spam while still reaching other inboxes.

Can one word in my email send it to spam?

Rarely on its own. Modern filters score the whole message and, above all, the sender's reputation. Content issues add points, but authentication and reputation problems are far more common causes.

How do I stop my emails going to spam?

Set up SPF, DKIM and DMARC correctly, send from a clean IP and domain, only mail people who asked to hear from you, remove bounces promptly, and keep complaint rates low. Test each change before sending to your whole list.

From the team behind Mail Tester UK

More from dijitul